ET2 Continuum Track Splice Box

Continuum Track Splice Box is a small polycarbonate box for Continuum track wiring, item ETMSC04, in Black or White. ET2 lists it at 3.5 inches long, 1.5 inches wide and 0.75 inch high.

Finishes: Black and White.

The Design Story

ET2's brochure labels the splice box with the words discreetly wire within, and its instruction sheet says the wires must be connected to a low voltage driver and never directly to a live wire, or a short may occur. ET2's page lists a wire length of 2.75 inches.

Why You’ll Love It

ET2 files the splice box in its Direct-Wire Driver group, but it lists no wattage or voltage for it and the instruction sheet tells you to connect it to a low voltage driver, so we do not treat it as a driver. You still need a 96W Continuum driver, sold separately.

Made for Real Life

Wipe the finish with a soft damp cloth and skip abrasive or solvent cleaners.

Works With This Item

Continuum is a track system, so the track, power, connectors and light heads are separate items that work together. Everything below is sold separately.

• Track rail: Continuum Track Rail
• Power (driver): Continuum 96W On-Track Driver, Continuum 96W Remote Hard-Wired Driver
• Track connectors: Continuum End to End Track Connector, Continuum 90 Degree Corner Track Connector, Continuum Wall to Ceiling Track Connector, Continuum 3-Way T Track Connector, Continuum 4-Way X Track Connector, Continuum End Track Connector
• Other plates and boxes: Continuum Track Plug and Cover Plate, Continuum Track Cover Plate
• Light heads: Continuum Flat Track Light, Continuum Optic Track Light, Continuum Anti-Glare Track Light, Continuum 90 Degree Corner Track Light, Continuum Wall to Ceiling Corner Track Light, Continuum Gimbal Flat Track Light, Continuum Gimbal Optic Track Light, Continuum Mini Spot Track Light, Continuum 2 in Spot Track Light, Continuum Adjustable Beam Spot Track Light, Continuum Optical Track Light, Continuum Reading Track Light, Continuum Wall Washer Track Light, Continuum 20 in Tube Track Light
• Track pendants: Continuum Handler Track Pendant, Continuum Tube Track Pendant, Continuum Rope Track Pendant, Continuum Sphere Track Pendant, Continuum Snowball Track Pendant

Putting It Together

ET2 posts an assembly sheet for this item: Assembly sheet (PDF). ET2 recommends a qualified electrician for the install.

Product Details

Where It Shines

It belongs to the wiring side of a Continuum install. The instruction sheet says to disconnect power before assembling, and installing it is electrical work, so ET2 recommends a qualified electrician.

Questions We Hear Most

Is the splice box a driver?

ET2 lists it in the Direct-Wire Driver group but gives no wattage or voltage, and its instruction sheet says to connect the wires to a low voltage driver. We therefore treat it as a wiring box. A 96W Continuum driver is a separate item.

How big is the Splice Box?

The splice box measures length 3.5 in, width 1.5 in and height 0.75 in. Exact figures are in the product details above.

Where can I install the Splice Box?

ET2 does not list a location rating for this item, so treat it as indoor dry-location use unless ET2 confirms otherwise. ET2 recommends a qualified electrician for the install.

Why We Love It

It gives low voltage connections an enclosure instead of loose wire.

Shipping Info