ET2 Continuum Track Cover Plate

Continuum Track Cover Plate is a flat plate for the Continuum track system, offered as two models, ETMSC02 and ETMSC03, each in Black or White. Both are listed at 5 inches by 5 inches and 0.25 inch thick.

It comes in 2 versions: ETMSC02 and ETMSC03. Finishes: Black and White.

Choose Your Version

The Design Story

ET2's brochure shows the track with a cover plate and lists both models as Track Cover Plate with the same 5 x 5 x 0.25 inch size. ET2 does not say how ETMSC02 and ETMSC03 are used differently, but the photos show the difference in the plate: ETMSC02 has a closed central slot with small vent slots, while ETMSC03 has an open notch cut in from one edge. The prices differ, and the table above lists each item number so you can match the one you want.

Why You’ll Love It

It is a plain plate with no electrical rating: ET2 lists total wattage as 0 and no voltage, so it is not a driver or a light. ET2 rates it for dry locations and gives an operating range of -20 to 40 degrees C (-4 to 104 degrees F).

Made for Real Life

Wipe the finish with a soft damp cloth and skip abrasive or solvent cleaners.

Works With This Item

Continuum is a track system, so the track, power, connectors and light heads are separate items that work together. Everything below is sold separately.

• Track rail: Continuum Track Rail
• Power (driver): Continuum 96W On-Track Driver, Continuum 96W Remote Hard-Wired Driver
• Track connectors: Continuum End to End Track Connector, Continuum 90 Degree Corner Track Connector, Continuum Wall to Ceiling Track Connector, Continuum 3-Way T Track Connector, Continuum 4-Way X Track Connector, Continuum End Track Connector
• Other plates and boxes: Continuum Track Plug and Cover Plate, Continuum Track Splice Box
• Light heads: Continuum Flat Track Light, Continuum Optic Track Light, Continuum Anti-Glare Track Light, Continuum 90 Degree Corner Track Light, Continuum Wall to Ceiling Corner Track Light, Continuum Gimbal Flat Track Light, Continuum Gimbal Optic Track Light, Continuum Mini Spot Track Light, Continuum 2 in Spot Track Light, Continuum Adjustable Beam Spot Track Light, Continuum Optical Track Light, Continuum Reading Track Light, Continuum Wall Washer Track Light, Continuum 20 in Tube Track Light
• Track pendants: Continuum Handler Track Pendant, Continuum Tube Track Pendant, Continuum Rope Track Pendant, Continuum Sphere Track Pendant, Continuum Snowball Track Pendant

Putting It Together

ET2 recommends a qualified electrician for the install.

Product Details

Where It Shines

It is for dry locations with a Continuum installation. It is sold separately from the track, the driver and the heads. Because ET2 does not explain the two models, contact us with your layout if you are unsure which to order.

Questions We Hear Most

What is the difference between ETMSC02 and ETMSC03?

ET2 does not say how they are used differently. In the photos ETMSC02 has a closed central slot and ETMSC03 an open notch cut in from one edge. Both are listed as Continuum Track Cover Plate, 5 x 5 x 0.25 inches, Black or White, rated for dry locations. The ETMSC03 is priced higher than the ETMSC02. Contact us if you need to know which fits your install.

How big is the Track Cover Plate?

Every version is 5 in long, 5 in wide and 0.25 in high. The Choose Your Version table above lists each size.

Where can I install the Track Cover Plate?

It is rated for dry locations only, so keep it indoors and out of any space exposed to rain or direct water. ET2 recommends a qualified electrician for the install.

Why We Love It

It comes in the same Black and White as the Continuum track.

Shipping Info