ET2 Continuum LED Handler Track Pendant

Continuum Handler is a single-light LED pendant for the Continuum 24V track system. It is 2 inches square and 10 inches tall, and comes in Black, White or Natural Aged Brass.

Finishes: Black, White and Natural Aged Brass.

The Design Story

Continuum is ET2's ultra-slim track system, with track lengths that can be extended, connected or cut to fit the space. The Handler is one of its pendants, so the light hangs on a cord instead of sitting on the track. The cord is 78.75 inches long and the body is aluminum.

Why You’ll Love It

The tall, narrow 2 by 10 inch body puts one LED at the end of a long cord. It delivers 350 lumens at 3000K with a CRI of 90, draws 5 watts, dims, and has a 35,000 hour rated life. There is no bulb to replace.

Made for Real Life

The LED is built in, so there is no bulb to find or match. Wipe the finish with a soft damp cloth and skip abrasive or solvent cleaners.

Not sure which finish to pick? Finishes explained walks through the options.

Works With This Item

This item mounts on a Continuum track, and the track, a driver and any connectors are separate items. Everything below is sold separately.

• Track rail: Continuum Track Rail
• Power (driver): Continuum 96W On-Track Driver, Continuum 96W Remote Hard-Wired Driver
• Track connectors: Continuum End to End Track Connector, Continuum 90 Degree Corner Track Connector, Continuum Wall to Ceiling Track Connector, Continuum 3-Way T Track Connector, Continuum 4-Way X Track Connector, Continuum End Track Connector
• Plug, cover plates and splice box: Continuum Track Plug and Cover Plate, Continuum Track Cover Plate, Continuum Track Splice Box
• Light heads: Continuum Flat Track Light, Continuum Optic Track Light, Continuum Anti-Glare Track Light, Continuum 90 Degree Corner Track Light, Continuum Wall to Ceiling Corner Track Light, Continuum Gimbal Flat Track Light, Continuum Gimbal Optic Track Light, Continuum Mini Spot Track Light, Continuum 2 in Spot Track Light, Continuum Adjustable Beam Spot Track Light, Continuum Optical Track Light, Continuum Reading Track Light, Continuum Wall Washer Track Light, Continuum 20 in Tube Track Light
• Other track pendants: Continuum Tube Track Pendant, Continuum Rope Track Pendant, Continuum Sphere Track Pendant, Continuum Snowball Track Pendant

Putting It Together

ET2 recommends a qualified electrician for the install.

Product Details

Where It Shines

It is rated for dry locations, so it belongs indoors. Use it where a single point of light should hang below a Continuum track, such as over a counter, a side table or a reading chair.

Questions We Hear Most

What do I need to run a Handler pendant?

It needs a Continuum track and a 24V driver, and both are sold separately. ET2 lists two 96W drivers, one that plugs onto the track and one that is installed remotely and hard-wired. Add up the wattage of everything on the run and keep the total under the driver's 96W. Each Handler draws 5W.

How big is the Continuum Handler pendant?

The pendant measures length 2 in, width 2 in and height 10 in. Exact figures are in the product details above.

How much light does the Continuum Handler pendant give?

Delivered output is 350 lumens, with a color temperature of 3000K and CRI 90.

Will my dimmer work with it?

Yes, it is a dimmable fixture. Send us your dimmer or driver model and we will help you confirm the match before you order.

Can the LED in the Continuum Handler pendant be replaced?

The LED is integrated and ET2 does not list the board as replaceable, so plan on it as a permanent light source with a rated life of 35,000 hours.

Where can I install the Continuum Handler pendant?

It is rated for dry locations only, so keep it indoors and out of any space exposed to rain or direct water. ET2 recommends a qualified electrician for the install.

Why We Love It

A tall, narrow pendant that hangs a single dimmable LED from a Continuum track on a long cord.

Shipping Info