ET2 Continuum Track Plug and Cover Plate

Continuum Track Plug and Cover Plate is a Continuum accessory, item ETMSC01, in Black or White. It is a round polycarbonate plate about 5 inches across and 0.25 inch thick, with a short flat lead ending in a small plug.

Finishes: Black and White.

The Design Story

ET2's Continuum brochure lists this item as the Electricity Module and Cover Plate, under the heading Electricity Feed and Cover Plate, and notes that the driver is not included. ET2's product page calls it a component of the track system and does not describe its function further, so that is all we state.

Why You’ll Love It

ET2 posts an assembly sheet for it, linked below. ET2 lists no voltage and a total wattage of 0, so it does not replace a driver. You still need a 96W Continuum driver, sold separately.

Made for Real Life

Wipe the finish with a soft damp cloth and skip abrasive or solvent cleaners.

Works With This Item

Continuum is a track system, so the track, power, connectors and light heads are separate items that work together. Everything below is sold separately.

• Track rail: Continuum Track Rail
• Power (driver): Continuum 96W On-Track Driver, Continuum 96W Remote Hard-Wired Driver
• Track connectors: Continuum End to End Track Connector, Continuum 90 Degree Corner Track Connector, Continuum Wall to Ceiling Track Connector, Continuum 3-Way T Track Connector, Continuum 4-Way X Track Connector, Continuum End Track Connector
• Other plates and boxes: Continuum Track Cover Plate, Continuum Track Splice Box
• Light heads: Continuum Flat Track Light, Continuum Optic Track Light, Continuum Anti-Glare Track Light, Continuum 90 Degree Corner Track Light, Continuum Wall to Ceiling Corner Track Light, Continuum Gimbal Flat Track Light, Continuum Gimbal Optic Track Light, Continuum Mini Spot Track Light, Continuum 2 in Spot Track Light, Continuum Adjustable Beam Spot Track Light, Continuum Optical Track Light, Continuum Reading Track Light, Continuum Wall Washer Track Light, Continuum 20 in Tube Track Light
• Track pendants: Continuum Handler Track Pendant, Continuum Tube Track Pendant, Continuum Rope Track Pendant, Continuum Sphere Track Pendant, Continuum Snowball Track Pendant

Putting It Together

ET2 posts an assembly sheet for this item: Assembly sheet (PDF). ET2 recommends a qualified electrician for the install.

Product Details

Where It Shines

It goes with a Continuum track installation. It is sold separately from the track, the driver and the light heads. If you are unsure whether your layout needs it, send us the plan and we will check it against ET2's information.

Questions We Hear Most

Does the Plug and Cover Plate include a driver?

No. ET2's brochure says the driver is not included. The two Continuum drivers, a 96W on-track driver and a 96W remote hard-wired driver, are separate items. Add up the wattage of your heads and keep it under 96W per driver.

How big is the Plug and Cover Plate?

The plate measures length 5 in, width 5 in and height 0.25 in. Exact figures are in the product details above.

Where can I install the Plug and Cover Plate?

ET2 does not list a location rating for this item, so treat it as indoor dry-location use unless ET2 confirms otherwise. ET2 recommends a qualified electrician for the install.

Why We Love It

It comes in the same Black and White as the Continuum track.

Shipping Info