ET2 Continuum LED Flat Track Light

Continuum Flat is a slim linear LED head that snaps onto the Continuum 24V track. It comes in three lengths, 5, 9 and 13.5 inches, in Black or White.

It comes in 3 versions: 5 in, 9 in and 13.5 in. Finishes: Black and White.

Choose Your Version

The Design Story

Continuum is ET2's ultra-slim track system. The track lengths are field adjustable, so they can be extended, connected or cut to fit the space, and the light heads snap into place along them. The Flat head is a low-profile bar, 1 inch wide and 1.5 inches high, made of aluminum and polycarbonate.

Why You’ll Love It

The LED is built in, so there is no bulb to replace. The 5 and 9 inch heads deliver 450 lumens and the 13.5 inch head delivers 750, all at 3000K with a CRI of 90 and a 50,000 hour rated life. Longer heads draw more power, at 6, 9 and 15 watts.

Made for Real Life

The LED is built in, so there is no bulb to find or match. Wipe the finish with a soft damp cloth and skip abrasive or solvent cleaners.

Not sure which finish to pick? Finishes explained walks through the options.

Works With This Item

This item mounts on a Continuum track, and the track, a driver and any connectors are separate items. Everything below is sold separately.

• Track rail: Continuum Track Rail
• Power (driver): Continuum 96W On-Track Driver, Continuum 96W Remote Hard-Wired Driver
• Track connectors: Continuum End to End Track Connector, Continuum 90 Degree Corner Track Connector, Continuum Wall to Ceiling Track Connector, Continuum 3-Way T Track Connector, Continuum 4-Way X Track Connector, Continuum End Track Connector
• Plug, cover plates and splice box: Continuum Track Plug and Cover Plate, Continuum Track Cover Plate, Continuum Track Splice Box
• Track pendants: Continuum Handler Track Pendant, Continuum Tube Track Pendant, Continuum Rope Track Pendant, Continuum Sphere Track Pendant, Continuum Snowball Track Pendant

Putting It Together

ET2 posts an assembly sheet for each version: 5 in (PDF), 9 in (PDF) and 13.5 in (PDF). ET2 recommends a qualified electrician for the install.

Product Details

Where It Shines

It is rated for dry locations, so it belongs in indoor rooms. Mount a Continuum track along a kitchen counter, hallway, shelf or wall and place the Flat head where the light should land.

Questions We Hear Most

What else do I need to run a Flat head?

The Flat head needs a Continuum track and a 24V driver, and both are sold separately. ET2 lists the track in 31.5, 59 and 78.75 inch lengths and two 96W drivers, one that plugs onto the track and one that is installed remotely and hard-wired. Add up the wattage of the heads you plan to run and keep the total under the driver's 96W.

How big is the Continuum Flat head?

Across the versions, lengths run 5 to 13.5 in. Every version is 1 in wide and 1.5 in high. The Choose Your Version table above lists each size.

How much light does the Continuum Flat head give?

Delivered output in lumens is 450 (5 in and 9 in), 750 (13.5 in), with a color temperature of 3000K and CRI 90.

Will my dimmer work with it?

ET2 lists the dimming as Triac. Send us your dimmer or driver model and we will help you confirm the match before you order.

Can the LED in the Continuum Flat head be replaced?

The LED is integrated and ET2 does not list the board as replaceable, so plan on it as a permanent light source with a rated life of 50,000 hours.

Where can I install the Continuum Flat head?

It is rated for dry locations only, so keep it indoors and out of any space exposed to rain or direct water. ET2 recommends a qualified electrician for the install.

Why We Love It

It adds a thin, clean line of light to a Continuum track without a visible bulb or shade.

Shipping Info