ET2 Steppes LED Faceted Aluminum Outdoor Wall Light

Steppes is a slim outdoor wall light with sharply angled facets and a downward LED. It comes in three sizes, from 4.75 to 9.5 inches high, and every size comes in Black or Antique Bronze.

It comes in 3 versions: 4.75 x 4.75 in, 4.75 x 6.75 in and 7.5 x 9.5 in. Finishes: Black and Antique Bronze.

Choose Your Version

The Design Story

ET2 describes a slim profile that extends from the wall with angled facets, and says its scale lets it work as a step light or as a subtle wall sconce. The LED is concealed in the top housing and casts light down across a series of ridges, so the ridges catch different intensities of light. It projects 1 inch from the wall.

Why You’ll Love It

The LED is integrated. The small and mid sizes deliver 450 lumens at 10 watts, and the large size delivers 820 lumens in Black and 930 in Antique Bronze at 20 watts, all at 3000K and CRI 90. The small and mid sizes list Triac or ELV dimming, while dimming is not listed for the large size.

Made for Real Life

The LED is built in, so there is no bulb to find or match. Wipe the finish with a soft damp cloth and skip abrasive or solvent cleaners.

Not sure which finish to pick? Finishes explained walks through the options.

Putting It Together

ET2 posts an assembly sheet for each version: 4.75 x 4.75 in (PDF), 4.75 x 6.75 in (PDF) and 7.5 x 9.5 in (PDF). ET2 recommends a qualified electrician for the install.

Product Details

Where It Shines

Beside steps, along a short wall or next to a door where you want light directed down onto the surface. All versions are wet rated and ADA compliant.

Questions We Hear Most

Which Steppes size should I choose?

The small version is 4.75 inches wide and high, the mid version is 6.75 inches high and 4.75 wide, and the large is 9.5 inches high and 7.5 wide. All project 1 inch and light downward. Use the small or mid for steps and low walls, and the large where you want more output.

How big is the Steppes, and how far does it project?

Heights run from 4.75 to 9.5 in and widths run from 4.75 to 7.5 in, depending on the version. Projection from the wall is 1 in. The Choose Your Version table above lists each size.

How much light does the Steppes give?

Delivered output in lumens is 450 (4.75 x 4.75 in and 4.75 x 6.75 in), 820 (7.5 x 9.5 in Black), 930 (7.5 x 9.5 in Antique Bronze), with a color temperature of 3000K and CRI 90.

Which way can the Steppes be mounted?

ET2 lists the mounting orientation as facing down. The light direction is listed as downlight. Confirm the orientation you want against the product details before you rough in the box.

Will my dimmer work with it?

ET2 lists the dimming as Triac or ELV (4.75 x 4.75 in and 4.75 x 6.75 in); not listed for 7.5 x 9.5 in. Send us your dimmer model and we will help you confirm the match before you order.

Can the LED in the Steppes be replaced?

The LED is integrated and ET2 does not list the board as replaceable, so plan on it as a permanent light source with a rated life of 25,000 and 50,000 hours.

Where can I install the Steppes?

It is wet rated, so it can be installed outdoors where rain and spray reach it, as well as in covered or indoor spaces. ET2 lists it as ADA compliant. ET2 recommends a qualified electrician for the install.

Why We Love It

It is a slim, faceted downlight that can serve as either a step light or a wall sconce.

Shipping Info