ET2 Brik LED Aluminum Block Outdoor Wall Light

Brik is a block-shaped outdoor wall sconce with an integrated LED, offered in 4.75 inch and 6.25 inch square sizes and a 14 inch tall rectangle. Finishes are White, Black and Natural Aged Brass.

It comes in 3 versions: 4.75 in, 6.25 in and 14 in. Finishes: Black, White and Natural Aged Brass.

Choose Your Version

The Design Story

ET2 describes Brik as square aluminum blocks with a low profile. The 4.75 inch and 14 inch versions use aluminum with stainless steel and a glass shade and light horizontally. The 6.25 inch version is aluminum and lights up and down, installed in the downward orientation. A 6.25 inch version with MSP in the part number is also included, in Black and White. In the product photos these two MSP versions show a small round sensor on the front face, which the other versions do not have.

Why You’ll Love It

All versions use a built-in LED at 3000K with a CRI of 90, so there is no bulb to replace. Output grows with size, from 500 lumens at 4.75 inches to 1200 at 6.25 inches and 1490 at the 14 inch size. The 4.75 inch version runs on 120V, while the 6.25 and 14 inch versions accept 120 to 277V.

Made for Real Life

The LED is built in, so there is no bulb to find or match. Wipe the finish with a soft damp cloth and skip abrasive or solvent cleaners.

Not sure which finish to pick? Finishes explained walks through the options.

Putting It Together

ET2 posts an assembly sheet for each version: 4.75 in (PDF), 6.25 in (PDF) and 14 in (PDF). ET2 recommends a qualified electrician for the install.

Product Details

Where It Shines

Entry doors, garage sides and patio walls. The fixtures are wet rated and ET2 lists them as ADA compliant with a 1.5 to 2 inch projection, which suits narrow walkways. ET2 states they work in interior and exterior spaces.

Questions We Hear Most

How do the sizes differ?

The 4.75 inch size is 500 lumens at 4 watts and lights horizontally. The 6.25 inch size is 1200 lumens at 7 watts and lights up and down. The 14 inch size is 7 inches wide, 1490 lumens at 12 watts, and lights horizontally. Dimming also varies by version, so check the version you choose.

How big is the Brik, and how far does it project?

Heights run from 4.75 to 14 in and widths run from 4.75 to 7 in, depending on the version. Projection from the wall is 1.5 in (4.75 in and 14 in), 2 in (6.25 in). The Choose Your Version table above lists each size.

How much light does the Brik give?

Delivered output in lumens is 500 (4.75 in), 1200 (6.25 in), 1490 (14 in), with a color temperature of 3000K and CRI 90.

Which way can the Brik be mounted?

ET2 lists the mounting orientation as any orientation (4.75 in and 14 in), Facing down (6.25 in). The light direction is listed as horizontal (4.75 in and 14 in), Up and down (6.25 in). Confirm the orientation you want against the product details before you rough in the box.

Will my dimmer work with it?

ET2 lists the dimming as Dimmable (4.75 in and 14 in), Triac or ELV at 120V (6.25 in). Send us your dimmer model and we will help you confirm the match before you order.

Can the LED in the Brik be replaced?

The LED is integrated and ET2 does not list the board as replaceable, so plan on it as a permanent light source with a rated life of 25,000 hours.

Where can I install the Brik?

It is wet rated, so it can be installed outdoors where rain and spray reach it, as well as in covered or indoor spaces. ET2 lists it as ADA compliant. ET2 recommends a qualified electrician for the install.

Why We Love It

Simple geometric blocks that give a clean pool of light in three finishes and several sizes.

Shipping Info