















ET2 Puff LED Concrete Outdoor Wall Light
ET2 Puff LED Concrete Outdoor Wall Light
$184.00
/

Puff is a softly rounded outdoor wall sconce made from outdoor-rated concrete with an integrated LED. It comes in 8, 12, 16 and 22 inch heights in Chalk White.
It comes in 4 versions: 8 in, 12 in, 16 in and 22 in. The finish is Chalk White.
Choose Your Version
| Version | Fixture size | Location | Finishes | Item numbers |
|---|---|---|---|---|
| 8 in | 6 wide x 8 high, 4 projection (in) | Damp | Chalk White | E14390-CHK |
| 12 in | 6 wide x 12 high, 4 projection (in) | Damp | Chalk White | E14392-CHK |
| 16 in | 6 wide x 16 high, 4 projection (in) | Damp | Chalk White | E14394-CHK |
| 22 in | 6 wide x 22 high, 4 projection (in) | Damp | Chalk White | E14396-CHK |
The Design Story
ET2 describes the forms as rounded concrete with a diagonal reveal along the body that emits light and also casts light above and below. The material list is concrete, stainless steel and glass. Each has a half-round body 6 inches wide that projects 4 inches from the wall.
Why You’ll Love It
The LED is built in at 3000K with a CRI of 90, and it dims on triac or ELV. It runs on 120V. Stated output varies by size: 400 lumens at 8 inches, 600 at 12, 800 at 16 and 220 at 22 inches. Check the size you choose against your wall.
Made for Real Life
The LED is built in, so there is no bulb to find or match, and the board can be replaced if it ever needs service. Wipe the finish with a soft damp cloth and skip abrasive or solvent cleaners.
Putting It Together
ET2 posts an assembly sheet for each version: 8 in (PDF), 12 in (PDF), 16 in (PDF) and 22 in (PDF). ET2 recommends a qualified electrician for the install.
Product Details
| Maker | ET2 |
|---|---|
| Product | Puff LED Concrete Outdoor Wall Light |
| Type | Rounded concrete LED outdoor wall sconce, wall-mounted |
| Number of lights | 1 |
| Height | 8 in, 12 in, 16 in or 22 in |
| Width | 6 in |
| Projection from wall | 4 in |
| Backplate (width x height) | 5.12 x 0.63 in (8 in and 12 in), 5.11 x 0.63 in (16 in and 22 in) |
| Finishes | Chalk White |
| Material | Concrete, Stainless steel, Glass |
| Light source | Integrated LED, 50,000 hour rated life, board replaceable |
| Wattage | 12W (8 in), 18W (12 in), 24W (16 in), 27W (22 in) |
| Lumens | 400 (8 in), 600 (12 in), 800 (16 in), 220 (22 in) |
| Color temperature | 3000K |
| CRI | 90 |
| Input voltage | 120V |
| Dimming | Triac or ELV |
| Light direction | Up and down |
| Mounting orientation | Facing up or down |
| Location rating | Damp |
| ADA compliant | Yes |
| Certification | cETLus |
| Net weight | 4.03 lb (8 in), 5.6 lb (12 in), 7.4 lb (16 in), 9.9 lb (22 in) |
| Packed weight | 4.8 lb (8 in), 7 lb (12 in), 8.6 lb (16 in), 12.6 lb (22 in) |
| Item numbers | 8 in: E14390-CHK; 12 in: E14392-CHK; 16 in: E14394-CHK; 22 in: E14396-CHK |
Where It Shines
Porches, covered entries and sheltered patio walls. Puff is rated for damp locations, not wet, so place it where it is protected from direct rain.
Questions We Hear Most
Is Puff rated for wet locations?
No. ET2 lists Puff as damp rated, so install it in a covered or sheltered spot. It is cETLus listed and ADA compliant.
How big is the Puff, and how far does it project?
Heights run from 8 to 22 in and the width is 6 in on every version. Projection from the wall is 4 in. The Choose Your Version table above lists each size.
How much light does the Puff give?
Delivered output in lumens is 400 (8 in), 600 (12 in), 800 (16 in), 220 (22 in), with a color temperature of 3000K and CRI 90.
Which way can the Puff be mounted?
ET2 lists the mounting orientation as facing up or down. The light direction is listed as up and down. Confirm the orientation you want against the product details before you rough in the box.
Will my dimmer work with it?
ET2 lists the dimming as Triac or ELV. Send us your dimmer model and we will help you confirm the match before you order.
Can the LED in the Puff be replaced?
Yes. The LED board is replaceable and rated for 50,000 hours, so the fixture can be serviced instead of thrown away.
Where can I install the Puff?
It is damp rated, which suits covered outdoor spots such as a porch or a covered entry. It is not meant for open exposure to rain. ET2 lists it as ADA compliant. ET2 recommends a qualified electrician for the install.
Why We Love It
A rounded concrete form that gives a glow above and below the fixture and feels soft next to hard exterior walls.
Shipping Info
| Processing Time | Ships in 3 to 5 business days. |
|---|---|
| Ships From | United States |
Shipping & Returns
Free Shipping within the U.S. for orders over $100.
Because many of our pieces are made to order or specially sourced, most items are considered final sale.
What are the items you could return?
1. Items received damaged or broken
2. Incorrect items that were shipped
3. Defective items
A replacement will be shipped right away.
Looking to save more? Ask us for a discount—we're happy to work with your budget.
We're happy to help with product questions, quotes, lead times, trade orders and design advice. Send us a message with the form below, or reach us directly:
Phone: (866) 817-1878
Email: info@loftmodern.com
Address: LoftModern, a division of Modern Design Center, Inc., 337 N Vineyard Ave, Ontario, CA 91764, USA
We reply to messages within one business day. For damaged or incorrect items, please see our Return and refund policy. Interior designers and trade professionals can apply for a trade account.
Give us your space goals—we’ll suggest the perfect piece.
Not sure where to begin or which piece is right for your space? We’re here to help! Whether you need layout ideas, color pairing tips, or a second opinion before you hit “add to cart,” our design team is happy to offer guidance tailored to your style, needs, and home.























