Nora Lighting 4" Shallow LED Dedicated IC Air-Tight New Construction Housing

Nora Lighting 4" Shallow LED Dedicated IC Air-Tight New Construction Housing

Dedicated new construction housing for use in insulated ceilings can be in direct contact with insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. The housing is dedicated and labeled for use with LED retrofit luminaires.

Features

• Shallow IC rated housing for direct contact with insulation
• Quick connect provided for electrical connection to the LED reflector
• IC Air-Tight energy saving by reducing the flow of air through the ceiling
• cULus listed for damp location and through branch circuit wiring

Housing
0.040 aluminum housing with riveted cap adjusts from 1/2" to 1" depth.

Air Flow Restriction
Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.

Clearance
"IC" Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation.

Bar Hangers
Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on frame. Hanger bars have T-Bar slot and alignment feet. Bar hangers are parallel to junction box, but can be repositioned 90° perpendicular to junction box if desired. "L" Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allows easy installation in a suspended ceiling.

Junction Box
Prewired 25 cubic inch 0.064" thick galvanized steel with three 1/2" trade size knockouts, one 3/8" trade size knockout, one 3/4" trade size knockout, four Romex® pryouts and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).

Input Voltage
120V or 277V

Socket
Quick connect for LED reflectors

Operating Temp.
77°F (25°C) max. ambient temperature

Dimming
Specified by reflector

Step Down Transformer (converts 277V input to 120V)
Optional 50W step down transformer installed (NHIC-427LMRAT/277). Through branch wiring is limited to 3-in and 3-out.

Labels and Listings

• cULus Listed for damp location & feed through (wet location when used with compatible reflectors)
• Meets or exceeds ASTM-283 Air-Tight requirements
• Certified to the high efficacy requirements of California Title 24 JA8-2019 (when used with compatible reflectors)
• RoHS compliant

Dimension
8" L x 5 3/4" W x 3 1/2" H

Shipping Info
Usually ships in 5 to 7 business days. Please message us to find out the availability of this item.