Nora Lighting

6" Marquise II, IC Air Tight Sloped Remodel Housing by Nora Lighting

$77.22 $108.10
Loading reviews...
  • 6" Marquise II, IC Air Tight Sloped Remodel Housing by Nora Lighting
  • 6" Marquise II, IC Air Tight Sloped Remodel Housing by Nora Lighting

Nora Lighting

6" Marquise II, IC Air Tight Sloped Remodel Housing by Nora Lighting

$77.22 $108.10
Loading reviews...

Nora Lighting 6" Marquise II, IC Air-Tight Sloped Remodel Housing

Nora Lighting’s IC construction housing for sloped ceiling offer a clear path of unobstructed light from a 6/12 pitch ceiling to any floor or surface or 12/12 pitch with designated trims. Air-tight housing additionally reduces energy costs by decreasing the flow or air escaping through the ceiling. Rated for direct contact with insulation and adjacent ceiling structures. Nora’s sloped IC housings are easy and quick to install and accepts Marquise II sloped reflectors.

CONSTRUCTION
Plaster Frame: High quality .035 steel die cut one piece frame. Bar hanger brackets on all four sides provide two possible positions for installations. Integral brackets and winguts enable housing to be adjusted for 2/12 - 6/12 ceiling pitch.

Housing: 0.035 steel housing. Riveted wrap and dome cap construction. Integral fold-out torsion spring brackets. Knockouts near top of housing provided for coil springs.

Air Flow Restriction: Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.

Clearance*: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation.

Junction Box: Prewired 25 cubic inch 0.064" thick galvanized steel, with five 1/2", two 3/4" knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).

Mounting:
New Construction: Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on frame. Bar hangers are parallel to junction box, but can be repositioned 90º perpendicular to junction box if desired. "L" Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allow for easy installation in a suspended ceiling. Accepts ceiling thickness from 5/8" to 1-3/8".

Remodel: Four high tension tempered steel springs secure remodel housing to 5/8" thick (max) ceiling (Hole cutout template provided for convenience).

Electrical
Input Voltage: 120V or 277V
Lumens / Wattage: 1400lm / 17W
Operating Temp.: 0˚C to 45˚C ambient temperature
Dimming: 
LE2: 277V Input; 0-10V dimming
LE3: 120V Input; Triac/ELV dimming
LE5: 120V Input; 0-10V dimming

Emergency LED Driver 
EM - Emergency Pack w/ Remote Test Switch

Labels and listings
· cULus Listed for Damp Location w/ Feed Through
· Meets or exceeds ASTM-283 Air-Tight Requirements 

Item Code
NHRMIC2-926

Return Policy
All sales are final, and not eligible for return. We accept returns for exchange for items damaged in transit, or if the item is defective.

  • Gallery
  • Description
  • Reviews

Nora Lighting 6" Marquise II, IC Air-Tight Sloped Remodel Housing

Nora Lighting’s IC construction housing for sloped ceiling offer a clear path of unobstructed light from a 6/12 pitch ceiling to any floor or surface or 12/12 pitch with designated trims. Air-tight housing additionally reduces energy costs by decreasing the flow or air escaping through the ceiling. Rated for direct contact with insulation and adjacent ceiling structures. Nora’s sloped IC housings are easy and quick to install and accepts Marquise II sloped reflectors.

CONSTRUCTION
Plaster Frame: High quality .035 steel die cut one piece frame. Bar hanger brackets on all four sides provide two possible positions for installations. Integral brackets and winguts enable housing to be adjusted for 2/12 - 6/12 ceiling pitch.

Housing: 0.035 steel housing. Riveted wrap and dome cap construction. Integral fold-out torsion spring brackets. Knockouts near top of housing provided for coil springs.

Air Flow Restriction: Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.

Clearance*: “IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation.

Junction Box: Prewired 25 cubic inch 0.064" thick galvanized steel, with five 1/2", two 3/4" knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).

Mounting:
New Construction: Two 13-3/4" to 24-1/2" adjustable bar hangers with captive nails are included on frame. Bar hangers are parallel to junction box, but can be repositioned 90º perpendicular to junction box if desired. "L" Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allow for easy installation in a suspended ceiling. Accepts ceiling thickness from 5/8" to 1-3/8".

Remodel: Four high tension tempered steel springs secure remodel housing to 5/8" thick (max) ceiling (Hole cutout template provided for convenience).

Electrical
Input Voltage: 120V or 277V
Lumens / Wattage: 1400lm / 17W
Operating Temp.: 0˚C to 45˚C ambient temperature
Dimming: 
LE2: 277V Input; 0-10V dimming
LE3: 120V Input; Triac/ELV dimming
LE5: 120V Input; 0-10V dimming

Emergency LED Driver 
EM - Emergency Pack w/ Remote Test Switch

Labels and listings
· cULus Listed for Damp Location w/ Feed Through
· Meets or exceeds ASTM-283 Air-Tight Requirements 

Item Code
NHRMIC2-926