Nora Lighting

6" Marquise I, IC Air Tight New Construction Double Wall Housing by Nora Lighting

$155.97 $218.40
Loading reviews...
  • 6" Marquise I, IC Air Tight New Construction Double Wall Housing by Nora Lighting
  • 6" Marquise I, IC Air Tight New Construction Double Wall Housing by Nora Lighting

Nora Lighting

6" Marquise I, IC Air Tight New Construction Double Wall Housing by Nora Lighting

$155.97 $218.40
Loading reviews...

Nora Lighting 6" Marquise I, IC Air-Tight New Construction Double Wall Housing

Dedicated new construction housing for use in insulated ceilings can be in direct contact with thermal insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling.

CONSTRUCTION
Plaster Frame: 0.040 steel frame with integral bar hanger brackets. Brackets can accommodate longer 27” accessory flat bar hangers. Brackets run along all sides of frame to allow bar hangers to be run parallel or perpendicular to junction box.

Housing: 0.040 aluminum housing with riveted cap adjusts from 3/8” to 7/8”. Spring brackets accept torsion wing trim springs; slots on socket plate surface accept standard coil springs.

Air Flow Restriction: Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.

Clearance: “IC” Insulated ceiling housings are direct contact rated; no minimum clearance is required.

Bar Hangers: Two 13-3/4” to 24-1/2” adjustable bar hangers with captive nails are included on frame. Bar hangers are parallel to junction box, but can be repositioned 90º perpendicular to junction box if
desired. “L” Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allow for easy installation in a suspended ceiling.

Junction Box: Prewired 25 cubic inch 0.064” thick galvanized steel, with five 1/2”, two 3/4” knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).

Electrical
Input Voltage: 120V or 277V
Delivered Lumens / Wattage:
NHMIC-612 = 1246lm / 16W;
NHMIC-620 = 1951lm / 26W
Operating Temp.: 0˚C to 75˚C ambient temperature
Comfort Dim: Available in 1250lm & 2000lm
Dimming:
LE1: 120V Input; Triac/ELV/0-10V dimming
LE2: 277V Input; 0-10V dimming
LE4: 120V Input; Triac/ELV/0-10V dimming

Emergency LED Driver 
EM: Emergency Pack w/ Remote Test Switch

Labels and listings
· cULus Listed for Damp Location w/ Feed Through
· cULus Wet Listed (Only with designated trims)
· Meets or exceeds ASTM-283 Air-Tight Requirements

Item Code
NHMICD-6

Return Policy
All sales are final, and not eligible for return. We accept returns for exchange for items damaged in transit, or if the item is defective.

  • Gallery
  • Description
  • Reviews

Nora Lighting 6" Marquise I, IC Air-Tight New Construction Double Wall Housing

Dedicated new construction housing for use in insulated ceilings can be in direct contact with thermal insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling.

CONSTRUCTION
Plaster Frame: 0.040 steel frame with integral bar hanger brackets. Brackets can accommodate longer 27” accessory flat bar hangers. Brackets run along all sides of frame to allow bar hangers to be run parallel or perpendicular to junction box.

Housing: 0.040 aluminum housing with riveted cap adjusts from 3/8” to 7/8”. Spring brackets accept torsion wing trim springs; slots on socket plate surface accept standard coil springs.

Air Flow Restriction: Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.

Clearance: “IC” Insulated ceiling housings are direct contact rated; no minimum clearance is required.

Bar Hangers: Two 13-3/4” to 24-1/2” adjustable bar hangers with captive nails are included on frame. Bar hangers are parallel to junction box, but can be repositioned 90º perpendicular to junction box if
desired. “L” Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allow for easy installation in a suspended ceiling.

Junction Box: Prewired 25 cubic inch 0.064” thick galvanized steel, with five 1/2”, two 3/4” knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).

Electrical
Input Voltage: 120V or 277V
Delivered Lumens / Wattage:
NHMIC-612 = 1246lm / 16W;
NHMIC-620 = 1951lm / 26W
Operating Temp.: 0˚C to 75˚C ambient temperature
Comfort Dim: Available in 1250lm & 2000lm
Dimming:
LE1: 120V Input; Triac/ELV/0-10V dimming
LE2: 277V Input; 0-10V dimming
LE4: 120V Input; Triac/ELV/0-10V dimming

Emergency LED Driver 
EM: Emergency Pack w/ Remote Test Switch

Labels and listings
· cULus Listed for Damp Location w/ Feed Through
· cULus Wet Listed (Only with designated trims)
· Meets or exceeds ASTM-283 Air-Tight Requirements

Item Code
NHMICD-6